Debt to equity ratios for healthy businesses (2024)

Taking on too much debt can make you less flexible and expose you to risk if revenues fall or interest rates rise.

Exactly what level of debt is suitable for your business depends on your precise requirements at any one time.

There is a healthy level of debt, or 'gearing', that enables a business to grow and capture market share.

It's not an exact science, however, and what's regarded as healthy will also differ from industry to industry.

For example, capital-intensive industries such as manufacturing commonly have higher levels of debt than, say, a tech company that operates online.

The debt ratio is a simple formula to show how capital has been raised to run a business.

It's considered an important financial metric because it indicates (a) how financially stable a company is when facing problems with trading or other operational considerations and (b) what ability it has to raise additional capital for growth.

What is the debt to equity ratio?

A company's debt ratio is commonly seen as a measure of its stability.

The ratio measures the level of debt the company takes on to finance its operations, against the level of capital, or equity, that's available.

It's calculated by dividing a business' total liabilities by the total amount of shareholders' equity.

Shareholders' equity represents the company's net worth - that is, the amount shareholders would receive if the company's total assets were liquidated and all of its debts repaid.

It might also be calculated by subtracting the company's total liabilities from its total assets, both of which are itemised on the company's balance sheet.

The resulting figure shows how much the company relies on debt.

A higher ratio suggests that it is more dependent on funding from outside the business, and therefore potentially less stable if it were to encounter problems with trading or other factors relating to how it operates.

Why is the debt ratio important?

Generally, a good debt ratio is around 1 to 1.5.

However, the ideal debt ratio will vary depending on the industry, as some industries use more debt financing than others.

Capital-intensive industries like the financial and manufacturing industries often have higher ratios that can be greater than 2.

A high debt ratio indicates a business using debt to finance its growth.

Companies that invest large amounts of money in assets and operations (capital-intensive companies) often have a higher debt ratio.

For lenders and investors, a high ratio means a riskier investment because the business might not be able to make enough money to repay its debts.

If a debt ratio is lower - closer to zero - this often means the business hasn't relied on borrowing to finance operations.

Investors can be unwilling to invest in a company with a very low ratio, as it suggests the business isn't realising the potential profit or value it could gain by borrowing and increasing the scale of its operations.

Servicing your debt

When deciding what level of debt is suitable for your business, you should consider whether you'll be able to service that debt in the future.

Determining whether your level of debt is healthy means asking questions like the following:

  • Do you operate in an industry that naturally requires a high level of debt to function effectively and keep up with competitors?
  • How does the result of your debt ratio analysis compare with companies of a similar set-up in your sector?
  • Have you provided a personal guarantee for any of the business' borrowing?
  • Is your market likely to decline in the near future?
  • Could a rise in interest rates affect your ability to service the debt?

Be aware that providing personal guarantees for business borrowing is common, but it can put you at risk of personal liability should the company get into difficulty.

Dealing with debt

If you're having problems dealing with debt, there may be some measures you can take.

Find out more on our Dealing with debt page.

You might also consider debt consolidation and refinancing as possible ways to reduce your monthly repayments.

Even if you don't have any immediate issues, you should make sure your business has sufficient working capital to cope with tougher trading conditions.

Reference to any organisation, business and event on this page does not constitute an endorsem*nt or recommendation from the British Business Bank or the UK Government. Whilst we make reasonable efforts to keep the information on this page up to date, we do not guarantee or warrant (implied or otherwise) that it is current, accurate or complete. The information is intended for general information purposes only and does not take into account your personal situation, nor does it constitute legal, financial, tax or other professional advice. You should always consider whether the information is applicable to your particular circ*mstances and, where appropriate, seek professional or specialist advice or support.

Debt to equity ratios for healthy businesses (2024)

FAQs

Debt to equity ratios for healthy businesses? ›

Generally, a good debt ratio is around 1 to 1.5. However, the ideal debt ratio will vary depending on the industry, as some industries use more debt financing than others. Capital-intensive industries like the financial and manufacturing industries often have higher ratios that can be greater than 2.

What is a healthy debt-to-equity ratio for a company? ›

What is a good debt-to-equity ratio? Although it varies from industry to industry, a debt-to-equity ratio of around 2 or 2.5 is generally considered good.

Is 0.5 a good debt-to-equity ratio? ›

Generally, a lower ratio is better, as it implies that the company is in less debt and is less risky for lenders and investors. A debt-to-equity ratio of 0.5 or below is considered good.

What is a healthy debt to asset ratio for a company? ›

In general, a ratio around 0.3 to 0.6 is where many investors will feel comfortable, though a company's specific situation may yield different results.

How much debt ratio is good for a company? ›

In general, many investors look for a company to have a debt ratio between 0.3 and 0.6. From a pure risk perspective, debt ratios of 0.4 or lower are considered better, while a debt ratio of 0.6 or higher makes it more difficult to borrow money.

Is a debt-to-equity ratio of 50% good? ›

Yes, a D/E ratio of 50% or 0.5 is very good. This means it is a low-debt business and the company's equity is twice as high as its debts.

Is a debt ratio of 75% good? ›

If the ratio is below 1, the company has more assets than debt. Broadly speaking, ratios of 60% (0.6) or more are considered high, while ratios of 40% (0.4) or less are considered low. However, what constitutes a “good debt ratio” can vary depending on industry norms, business objectives, and economic conditions.

Is 0.7 a good debt-to-equity ratio? ›

The debt-to-equity ratio is calculated by dividing a corporation's total liabilities by its shareholder equity. The optimal D/E ratio varies by industry, but it should not be above a level of 2.0.

Is 0.1 debt equity ratio good? ›

Debt-to-equity ratio values tend to land between 0.1 (almost no debt relative to equity) and 0.9 (very high levels of debt relative to equity). Most companies aim for a ratio between these two extremes, both for reasons of economic sustainability and to attract investors or lenders.

Is a debt-to-equity ratio of 1.4 good? ›

A good debt to equity ratio is around 1 to 1.5. However, the ideal debt to equity ratio will vary depending on the industry because some industries use more debt financing than others. Capital-intensive industries like the financial and manufacturing industries often have higher ratios that can be greater than 2.

What is a healthy bad debt ratio? ›

Lenders prefer bad debt to sales ratios under 0.4 or 40%. However, most companies prefer to have much lower numbers than this. Unless you have no bad debt, there is room to improve.

How much debt is healthy? ›

Ideally, financial experts like to see a DTI of no more than 15 to 20 percent of your net income. For example, a family with a $250 car payment and $100 of monthly credit card payments, and $2,500 net income per month would have a DTI of 14 percent ($350/$2,500 = 0.14 or 14%).

What is a good equity ratio? ›

Still, as a general rule of thumb, most companies aim for an equity ratio of around 50%. Companies with ratios ranging around 50% to 80% tend to be considered “conservative”, while those with ratios between 20% and 40% are considered “leveraged”.

Is 5 a good debt-to-equity ratio? ›

A good debt to equity ratio is around 1 to 1.5. However, the ideal debt to equity ratio will vary depending on the industry because some industries use more debt financing than others. Capital-intensive industries like the financial and manufacturing industries often have higher ratios that can be greater than 2.

Is 40% a good debt-to-equity ratio? ›

A debt ratio between 30% and 36% is also considered good. It's when you're approaching 40% that you have to be very, very vigilant. With a threshold like that, you're a greater risk to lenders. You may already be having trouble making your payments each month.

What if the debt-to-equity ratio is less than 1? ›

The debt to equity ratio shows a company's debt as a percentage of its shareholder's equity. If the debt to equity ratio is less than 1.0, then the firm is generally less risky than firms whose debt to equity ratio is greater than 1.0.

References

Top Articles
Latest Posts
Article information

Author: Rubie Ullrich

Last Updated:

Views: 5589

Rating: 4.1 / 5 (52 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Rubie Ullrich

Birthday: 1998-02-02

Address: 743 Stoltenberg Center, Genovevaville, NJ 59925-3119

Phone: +2202978377583

Job: Administration Engineer

Hobby: Surfing, Sailing, Listening to music, Web surfing, Kitesurfing, Geocaching, Backpacking

Introduction: My name is Rubie Ullrich, I am a enthusiastic, perfect, tender, vivacious, talented, famous, delightful person who loves writing and wants to share my knowledge and understanding with you.